Skip to main content
TrueWattLab
Menu
Last Verified: 2026-11-22

How to Calculate Real Power Station Runtime (Physics Formula & Inverter Losses)

Direct Answer

Dividing rated Watt-hours by appliance Watts overestimates real battery runtime by 20%-55%. Accurate runtime equals (Capacity Wh x Conversion Efficiency x Temperature Factor) divided by (Average Appliance Watts + Continuous Inverter Idle Draw), avoiding double-counting losses while accounting for duty cycles and cold-weather battery derating.

The Auditable TrueWattLab Runtime Equation

Most online blogs tell you to multiply battery capacity by 0.85 and divide by appliance watts. That shortcut fails on two fronts: it ignores the continuous parasitic draw of the AC inverter (often 8 W to 40 W just to keep 120V circuits alive) and treats cycling loads like refrigerators as running at 100% power.

Our physics engine models real energy flow from battery cells to outlet without double-discounting capacity:

VariableAC Mode Default / SourceDC / USB-C ModeEngineering Rationale
Conversion Efficiency (η)Tested lab value (0.825-0.92) or 0.85 conservative0.92 (direct DC regulation)DC->AC->DC wastes ~10%-18% as heat; DC avoids inversion
Inverter Idle Draw (W_idle)Verified spec (5.5-35 W) or class default (8 / 18 / 30 W)0 WActive 120V/240V inverter burns continuous standby overhead
Duty CyclePreset compressor/cycle ratio or EnergyGuide kWh/8.76SameFridges cycle ~30%-45%, chest freezers ~30%, sump pumps ~10%-15%
Temperature Factor1.00 (68 F) / 0.90 (32 F) / 0.75 (14 F)SameCold LiFePO4 cells exhibit higher internal resistance and lower deliverable Wh

Worked Example: 1,024 Wh Station Running a Modern ENERGY STAR Refrigerator

A typical 460 kWh/year ENERGY STAR refrigerator pulls ~150 W when its compressor runs (35% duty cycle = 52.5 Wh/h average).

A naive Wh/W calculation predicts 1,024 / 52.5 = 19.5 hours. Applying 85% AC efficiency alone drops that to 16.6 hours. Adding 18 W of continuous AC inverter overhead brings total average draw to 52.5 + 18 = 70.5 W, yielding 870.4 / 70.5 = 12.35 hours—37% shorter than naive math predicts.

Apply This Math Directly

Sources: OutdoorGearLab, StorageReview & APH Networks AC Discharge Benchmarks · U.S. DOE / ENERGY STAR Appliance Duty Cycle & EnergyGuide Methodology

Frequently Asked Questions

Should you subtract an extra 20% Depth of Discharge (DoD) on LiFePO4 stations?+
No. Modern LiFePO4 portable power stations (EcoFlow, BLUETTI, Jackery, Anker SOLIX) include an internal Battery Management System (BMS) that already reserves bottom cell voltage and rates nameplate Wh as usable DC capacity before inverter conversion losses.
Why do independent reviewers measure ~84%-92% AC usable Wh?+
Lab tests discharging through the AC port at moderate loads (200-500 W) combine inverter conversion efficiency and internal fan/BMS draw, typically delivering 840-920 Wh from a 1,024 Wh pack.
How does cold temperature affect runtime?+
Below freezing (32 F / 0 C) and down to 14 F (-10 C), usable discharge capacity drops roughly 10%-25%, and LFP BMS controllers lock out solar/AC recharging below 32 F to prevent lithium plating.